January 24 Through February 4—TUCSON, ARIZONA: Annual show
Welcome to the GemologyOnline.com Forum
A non-profit Forum for the exchange of gemological ideas
It is currently Thu Mar 28, 2024 4:31 am

All times are UTC - 4 hours




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: 2014 USFG Tucson Seminars for faceters
PostPosted: Sat Nov 16, 2013 3:37 pm 
Offline
Gold Member
User avatar

Joined: Sat Sep 29, 2007 8:14 pm
Posts: 1383
Location: Royal Oak, Michigan US
Hi everyone,
2014 USFG Tucson Seminars for faceters:

We are still at work creating opportunities for faceters who participate in the annual Tucson shows. At present we are still looking at the one day event which would be Friday the 7th of February.

For now, we have one speaker committed to presenting on Friday morning. I'll be back soon with further information, but for those that need to know....

Friday morning, the 7th of February
Will likely start at 8:00am
Old Pueblo Lapidary Club in northeast Tucson

More to come....

_________________
Warm regards,
Roger Dery
Royal Oak, Michigan US
http://www.rogerdery.com


Top
 Profile  
Reply with quote  
 Post subject: Re: 2014 USFG Tucson Seminars for faceters
PostPosted: Sat Nov 16, 2013 10:50 pm 
Offline
Gold Member

Joined: Mon May 14, 2007 11:00 am
Posts: 1133
Location: Monterey, CA
ROGER DERY wrote:
For now, we have one speaker committed to presenting on Friday morning. I'll be back soon with further information, but for those that need to know....

Would anyone be interested in "The Hanneman Identification Scheme for Rough and Faceted Gemstones"?


Top
 Profile  
Reply with quote  
 Post subject: Re: 2014 USFG Tucson Seminars for faceters
PostPosted: Sun Nov 17, 2013 8:34 am 
Offline
Gold Member
User avatar

Joined: Sat Sep 29, 2007 8:14 pm
Posts: 1383
Location: Royal Oak, Michigan US
Bill Hanneman wrote:
ROGER DERY wrote:
For now, we have one speaker committed to presenting on Friday morning. I'll be back soon with further information, but for those that need to know....

Would anyone be interested in "The Hanneman Identification Scheme for Rough and Faceted Gemstones"?
Dr Hanneman,
I believe faceters would like to know more. I'll pm you and we can work something out.

_________________
Warm regards,
Roger Dery
Royal Oak, Michigan US
http://www.rogerdery.com


Top
 Profile  
Reply with quote  
 Post subject: Re: 2014 USFG Tucson Seminars for faceters
PostPosted: Wed Nov 20, 2013 4:57 pm 
Offline
Valued Contributor
User avatar

Joined: Tue Sep 02, 2008 9:34 pm
Posts: 169
Location: Shoreview, MN
Bill Hanneman wrote:
Would anyone be interested in "The Hanneman Identification Scheme for Rough and Faceted Gemstones"?

Wow! Not scheduled to make it this year, but might be worth the trip to hear Dr. Hanneman ...

_________________
Steve Wallner
Westview Gems
www.westviewgems.com


Top
 Profile  
Reply with quote  
 Post subject: Re: 2014 USFG Tucson Seminars for faceters
PostPosted: Sun Nov 24, 2013 12:30 pm 
Offline
Gold Member
User avatar

Joined: Sat Sep 29, 2007 8:14 pm
Posts: 1383
Location: Royal Oak, Michigan US
Bill Hanneman wrote:
ROGER DERY wrote:
For now, we have one speaker committed to presenting on Friday morning. I'll be back soon with further information, but for those that need to know....

Would anyone be interested in "The Hanneman Identification Scheme for Rough and Faceted Gemstones"?
Hi Dr Hanneman,
I did not see your response from my p.m. - so am posting this here. Please contact me by phone or email. Both are in my profile.

Am in town till Saturday Nov 30th, then I am out of town for a while. Sooner is better as the USFG newsletter will go to print in a few days.

_________________
Warm regards,
Roger Dery
Royal Oak, Michigan US
http://www.rogerdery.com


Top
 Profile  
Reply with quote  
 Post subject: Re: 2014 USFG Tucson Seminars for faceters
PostPosted: Sun Nov 24, 2013 12:41 pm 
Offline
Gold Member
User avatar

Joined: Sat Sep 29, 2007 8:14 pm
Posts: 1383
Location: Royal Oak, Michigan US
To all interested faceters....
- this is for the Friday morning presentation at the OPLC in Tucson:

+++++++++++++++++++++++++++++++++++++++++++++++

A two-hour presentation delivered by Al Gilbertson, project manager of cut research for GIA, regarding the basic use of DiamCalc software as it relates to colored gemstones.

As most faceters cut designs either created themselves or purchased commerically, one is always wondering whether they've made a good design choice in regards to the type of rough they are working with. For years, by trial and error alone, a faceter could improve how a particular design worked out. Due to advances in technology, it is possible that by using software specifically designed to analyze how a finished gem may turn out, one could make adjustments in the design elements or workflow to enhance an appearance - or to reduce potential detrimental effects.

Having performed years of research in this area, Mr. Gilbertson will share with us the basics of using DiamCalc software and how it could enhance our work. This presentation is for those who may have an interest in pursuing the use of software to enhance their designing or finished product.

Participants do not need to own DiamCalc software. Though, it would be helpful if you are already familiar with GemCad.
+++++++++++++++++++++++++++++++++++++++++++++++

- keeping in mind, this is for faceters both new and experienced who have an interest in determining whether a design they are working with, whether acquired or created themselves, has merit. As for merit, this could connote general overall beauty, or brightness, or liveliness seen as light contrast within the viewing area, dispersion or other factors they deem to have value.

Al will begin promptly at 8:00am on Friday morning the 7th of February. He is available till roughly 10:15 where he will need to be back at his post with GIA staff in the Tucson Convention Center. Al understands this topic will create many questions. So he will bring his formal presentation to an end at about 9:30-ish and then take questions.

More to follow with other details......

_________________
Warm regards,
Roger Dery
Royal Oak, Michigan US
http://www.rogerdery.com


Top
 Profile  
Reply with quote  
 Post subject: Re: 2014 USFG Tucson Seminars for faceters
PostPosted: Sun Dec 01, 2013 2:31 am 
Offline
Moderator
User avatar

Joined: Fri Jun 25, 2010 10:06 pm
Posts: 2267
Location: Chapel Hill, NC / Toronto, ON
NOOOOOOOOOOOOOO I'm missing an excellent talk about DiamCalc AND an excellent talk by Dr. Hanneman!? Bad luck on the timing :(


Top
 Profile  
Reply with quote  
 Post subject: Re: 2014 USFG Tucson Seminars for faceters
PostPosted: Sun Dec 01, 2013 11:26 am 
Offline
Gold Member
User avatar

Joined: Sat Sep 29, 2007 8:14 pm
Posts: 1383
Location: Royal Oak, Michigan US
Hi Arya + all,
Further info will be forthcoming regarding the Tucson Seminars, and should be posted in the soon-to-be-published USFG Newsletter.

Hopefully we see you all there!

_________________
Warm regards,
Roger Dery
Royal Oak, Michigan US
http://www.rogerdery.com


Top
 Profile  
Reply with quote  
 Post subject: Re: 2014 USFG Tucson Seminars for faceters
PostPosted: Sun Dec 08, 2013 4:08 pm 
Offline
New to the Forum or The Quiet Type

Joined: Sat Jan 29, 2011 2:33 am
Posts: 3
Where can I get additional information on the Facetors gathering in Tucson, and find out what is required to be an attendee?

Thanks

TP


Top
 Profile  
Reply with quote  
 Post subject: 2014 USFG Tucson Seminars for faceters
PostPosted: Tue Jan 21, 2014 8:18 am 
Offline
Gold Member
User avatar

Joined: Sat Sep 29, 2007 8:14 pm
Posts: 1383
Location: Royal Oak, Michigan US
Friday morning - February 7th 2014
8:00am thru 12:30pm
Presentation at the Old Pueblo Lapidary Club in Tucson:

+++++++++++++++++++++++++++++++++++++++++++++++
8:00am
The USFG seminar sessions begin with a two-hour presentation delivered by Al Gilbertson, project manager of cut research for GIA, regarding the basic use of DiamCalc software as it relates to colored gemstones.

As most faceters cut designs either created themselves or purchased commercially, one may be wondering whether they've made a good design choice in regards to the type of rough they are working with. For years, by trial and error alone, a faceter could improve how a particular design worked out. Due to advances in technology, it is possible that by using software specifically designed to analyze how a finished gem may turn out, one could make adjustments in the design elements to enhance an appearance - or to reduce potential detrimental effects.

Having performed years of research in this area, Mr. Gilbertson will share with us the basics of using DiamCalc software and how it could enhance our work. This presentation is for those who may have an interest in pursuing the use of software to enhance their designs.

Participants do not need to own DiamCalc software. Though, it would be helpful if you are already familiar with GemCad.

This seminar is for faceters both new and experienced who have an interest in determining whether a design they are working with, whether acquired or created themselves, has merit.

Al will begin promptly at 8:00am on Friday morning the 7th of February. He is available till roughly 10:15 where he will need to be back at his post with GIA staff in the Tucson Convention Center. Al understands this topic will create many questions. So he will bring his formal presentation to an end at about 9:30-ish and then take questions.
+++++++++++++++++++++++++++++++++++++++++++++++
10:30am
Immediately after Mr. Gilbertson's presentation, will be followed by a presentation by Dr Bill Hanneman regarding "The Hanneman Identification Scheme for Rough and Faceted Gemstones".

Dr Hanneman will begin at roughly 10:30, and we've allowed 1-1/2 hours. In addition to sharing his unique concepts for processing identification specifically for faceters, he will also exhibit and demonstrate techniques he developed over 40 years ago that are still valid today. Dr Hanneman's methods are well-suited for those gem cutters making buying decisions when away from their shop equipment. Faceters should look at this as an opportunity to add another valuable tool to their arsenal to assist in making good purchasing decisions.

*coming soon - directions and map

_________________
Warm regards,
Roger Dery
Royal Oak, Michigan US
http://www.rogerdery.com


Top
 Profile  
Reply with quote  
 Post subject: 2014 USFG Tucson Seminars for faceters
PostPosted: Tue Jan 21, 2014 8:36 am 
Offline
Gold Member
User avatar

Joined: Sat Sep 29, 2007 8:14 pm
Posts: 1383
Location: Royal Oak, Michigan US
Where: Old Pueblo Lapidary Club building
3118 North Dale Avenue, Tucson, AZ 85712 - if you are at all familiar with Tucson, the location is near the intersection of North Alvernon Way and Fort Lowell Road. Can see the location here:
http://www.lapidaryclub.org/directions/index.shtml

Faceters,
The Old Pueblo Lapidary Club has again this year, obliged our request to use their clubhouse to house the USFG's panel of presenters. And for this we are most grateful. The location of the building is such that it is located in a residential area. And, due to this, we ask that you be respectful of their neighbors' property. If it is possible, please look for opportunities to share a ride with others as parking will be at a premium. Thank you for your consideration.

.... and now a little housekeeping
If you are a current member of the United States Faceters Guild, there is no charge to participate in the presentations. If you are not a member, we'd still love to have you join us at Tucson. (Or maybe you should just join the USFG an annual membership is only $18.)

_________________
Warm regards,
Roger Dery
Royal Oak, Michigan US
http://www.rogerdery.com


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 4 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Gemology Style ported to phpBB3 by Christian Bullock