GemologyOnline.com
https://gemologyonline.com/Forum/phpBB2/

Early attempts with Fitzroy river agate and wood
https://gemologyonline.com/Forum/phpBB2/viewtopic.php?f=28&t=22803
Page 1 of 1

Author:  Lefty [ Sat Jun 18, 2016 6:23 pm ]
Post subject:  Early attempts with Fitzroy river agate and wood

Some pics of my early days of learning to cab, the subject was agate/chalcedony and petrified wood from the Fitzroy river, about two hours drive from my home. It's not Agate creek quality stuff but I still kinda like it. If only the orange colour went right through instead of just being a skin.

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

I have probably collected about two 5-gallon drums of the stuff (when I say that, most of that is petrified wood) but even though it's not particularly striking - except for the vividly coloured stuff that with a few exceptions offers false hope by just being milky white inside - I keep going up and collecting it. Addicted to rockhounding :)

Only got another few years to keep getting it, they have decided that the city of Rockhampton downstream from the site has grown to the point where it needs a bigger water supply and they intend to put the dam right on this crossing.

I'd like to think that somewhere in the area is a little pocket that produces chalcedony that is that brilliant orange-red all the way through. Haven't found it yet.

Author:  Barbra Voltaire, FGG [ Sat Jun 18, 2016 7:50 pm ]
Post subject:  Re: Early attempts with Fitzroy river agate and wood

Nice!

Author:  Dan&Sally [ Sat Jun 18, 2016 8:18 pm ]
Post subject:  Re: Early attempts with Fitzroy river agate and wood

very similar to materials I put in the box for you. The dendrite agates are nice, I think there is a couple of those as well. But if you have a fifty gal drum full it will be just more of the same. I have no idea of the status of the shipment, been working and havent really had time to check. Next trip out I will head south to the Badlands and see about some agatised wood, its petrified but prettier. Good area from Medora ND to Baker MT.

Author:  Lefty [ Sat Jun 18, 2016 9:18 pm ]
Post subject:  Re: Early attempts with Fitzroy river agate and wood

That's ok Dan, the important bit is that the stuff you sent me comes from the other side of the world to where I live and I can put it in my display case marked as agate from the US - my own little piece of North Dakota :)

I haven't used postal tracking previously because Australia post only tracked within Australia. But when I posted your shipment, they told me that a new system has just been put in place and now the pack and track option allows me to track the progress of whatever I send to the US (and also Canada, New Zealand and Britain I think they said) right to its final destination.

I just looked and it's made it as far as Brisbane, the capital city of Queensland - was kinda hoping it would have actually been on a plane across the Pacific by now but at least I can keep you updated on how it's going.

Author:  wilsonintexas [ Sun Jun 19, 2016 4:06 am ]
Post subject:  Re: Early attempts with Fitzroy river agate and wood

When i bought my facet machine i also bougt the cabbing setup which was a motor with an alum bar on it tapped for a thread ans about 10 disks that screwed onto it. I would not use it because he cut it dry. But it included some nice petrified wod including a bright red one. I wil have to get some pictures some day.


But you have some nice pieces.

Author:  Lefty [ Sun Jun 19, 2016 4:07 pm ]
Post subject:  Re: Early attempts with Fitzroy river agate and wood

Cheers everyone.

Couple more bits, I quite like the jelly-like translucency.

Image

Image

Unpolished bit.
Image

One of the more interesting bits looks like a winter scene (well, not winter here), like a tree covered with snow.

Page 1 of 1 All times are UTC - 4 hours
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/