January 24 Through February 4—TUCSON, ARIZONA: Annual show
Welcome to the GemologyOnline.com Forum
A non-profit Forum for the exchange of gemological ideas
It is currently Tue Mar 19, 2024 2:43 am

All times are UTC - 4 hours




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Raman/PL results: Characterizing emerald types
PostPosted: Sat Jan 19, 2013 5:10 pm 
Offline
Site Admin
User avatar

Joined: Fri May 12, 2006 11:24 am
Posts: 7523
Location: Rome, Italy
Careful observation of exact chromium photoluminescence peak locations allows to make distinction or produces strong evidence in order to discriminate between natural and most synthetic emeralds. Additionally, natural emeralds can be characterized as geologically belonging to schist- or non-schist type.


The strong intensity of Raman spectrometer's 532 nm laser beam is capable of causing noticeable photoluminescence reactions in gems which are traditionally considered as non- or weak luminescent materials. Among these PL reactions we can have the diagnostic luminescence pattern of chromium ion in beryl; Emerald or Cr- bearing aquamarine are readily identified by luminescence reaction of chromium ion occupying aluminum site in beryl structure. Some emeralds having low chromium concentration are mainly colored by vanadium, but chromium content in these stones is still high enough to cause the luminescence reaction.

Image

Other impurities like magnesium, titanium and zinc occupying the same octahedral position in the beryl structure influence the position of detected chromium PL lines. A careful measurement of exact position of the major chromium PL lines allows to characterize the sample as belonging to one of the three major groups: synthetic emerald, natural schist type emerald and natural non-schist type emerald.

Synthetic emeralds

Many synthetic emeralds contain relative high Cr concentration compared to natural stones. The first clue about synthetic origin is the PL reaction's high intensity; many synthetic emeralds saturate the spectrometer already with the minimum exposure time of GemmoRaman-532 (1 millisecond). The sample must be oriented slightly off from the laser aperture in order to get readable results. This is not a diagnostic behavior but gives a very strong indication about the synthetic origin. PL peaks for both flux and hydrothermal synthetic emeralds occur at relatively low wavelengths compared to natural stones.

Natural emeralds

Natural emeralds can be characterized as belonging to two main types of geological occurrences; schist- type and non-schist type. This method combined with inclusion studies and absorption spectroscopy is very useful in order to determine the geographical origin of emeralds.

Picture1: Photoluminescence peaks of chromium in beryl structure. All spectra have been normalized, trimmed to 4050-4300 cm-1 and background corrected. Most of the spectra are vertically shifted in order to visualize the difference between major groups. Colored bars indicate the peak location variation in each major group.

Image

Examples of Type I (non-schist) emeralds: China (Malipo), Colombia (Chivor, La Mina Glorieta, Las Cruces, El Diamante, El Toro, La Vega de San Juan, Coscuez and Muzo), Nigeria (Jos, Gwantu), Tanzania (Sumbawanga)

Examples of Type II (schist) emeralds: Afghanistan (Panjshir Valley), Austria (Habachtal), Brazil (Carnaiba/Sotoco, Capoeirana, Itabira, Santa Teresinha), Russia (Malishevo, Perwomaisky, Mariinsky, Aulsky, Krupsky, Chitny, Tsheremshansky), Zambia (Kafubu area), Madagaskar (Mananjary, Ankadilalana), Zimbabwe (Sandawana), South Africa (Transvaal), Spain (Franqueira), Pakistan (Mingora Mines), Mozambique (Morrua district)

References:

Inessa Moroz, Michael Roth, Micheline Boudeulle and Gerard Panczer: Raman microspectroscopy and fluorescence of emeralds from various deposits. Journal of Raman Spectroscopy 31, 485–490 (2000)

Further reading:

Microscopic, chemical and spectroscopic investigations on emeralds of various origins Le Thi Thu Huong

_________________
GemmoRaman-532 - GemmoFTIR - GemmoSphere - EXA


Top
 Profile  
Reply with quote  
 Post subject: Re: Raman/pl Results: Characterizing emerald types
PostPosted: Sat Jan 19, 2013 9:46 pm 
Offline
Valued Contributor

Joined: Thu Sep 24, 2009 3:44 pm
Posts: 151
Location: Kingman,Az
Thank you Alberto,

The depth of knowledge here is amazing and
I appreciate every opportunity.
I do not understand as much of this as I intend to
but I am getting there.

The link is also appreciated really nice photos of
inclusions also.

Harold


Top
 Profile  
Reply with quote  
 Post subject: Re: Raman/pl Results: Characterizing emerald types
PostPosted: Sun Jan 20, 2013 1:50 am 
Offline
Gold Member

Joined: Mon May 14, 2007 11:00 am
Posts: 1133
Location: Monterey, CA
Alberto wrote:
Careful observation of exact chromium photoluminescence peak locations allows to make distinction or produces strong evidence in order to discriminate between natural and most synthetic emeralds. Additionally, natural emeralds can be characterized as geologically belonging to schist- or non-schist type.
g

Now, can you tell us how this correlates with the "more simple" Hanneman-Hodgkinson Synthetic Emerald and support filters?


Top
 Profile  
Reply with quote  
 Post subject: Re: Raman/PL results: Characterizing emerald types
PostPosted: Mon Jan 21, 2013 5:56 am 
Offline
Gemology Online Veteran
User avatar

Joined: Sun Oct 04, 2009 11:18 am
Posts: 595
Location: Madrid, Spain
Very interesting, thanks for sharing!

_________________
http://gem-sphalerite.com
http://gems-inclusions.com


Top
 Profile  
Reply with quote  
 Post subject: Re: Raman/PL results: Characterizing emerald types
PostPosted: Mon Jan 21, 2013 11:34 am 
Offline
Site Admin
User avatar

Joined: Sun Oct 16, 2005 12:22 pm
Posts: 21600
Location: San Francisco
Question:
How many samples have been tested?


Top
 Profile  
Reply with quote  
 Post subject: Re: Raman/PL results: Characterizing emerald types
PostPosted: Mon Jan 21, 2013 12:45 pm 
Offline
Site Admin
User avatar

Joined: Fri May 12, 2006 11:24 am
Posts: 7523
Location: Rome, Italy
We tested 20 samples – the spectra you can see in picture 1 – likely we will add more stones once we will have time (which is actually the only thing we desperately lack…. :( )

ciao
albé

_________________
GemmoRaman-532 - GemmoFTIR - GemmoSphere - EXA


Top
 Profile  
Reply with quote  
 Post subject: Re: Raman/PL results: Characterizing emerald types
PostPosted: Tue Jan 22, 2013 12:49 pm 
Offline
Gold Member
User avatar

Joined: Mon Apr 16, 2007 12:05 am
Posts: 1499
hi Alberto

Very interesting observations. What are actual wavelength values (nm) for peak pairs in each of the three cases?

Thanks, Brian


Top
 Profile  
Reply with quote  
 Post subject: Re: Raman/PL results: Characterizing emerald types
PostPosted: Tue Jan 22, 2013 1:34 pm 
Offline
Site Admin
User avatar

Joined: Fri May 12, 2006 11:24 am
Posts: 7523
Location: Rome, Italy
Hey Brian,

These are the wavelength for main peaks of the actual scans

Synthetic: 683.67 - 683.81 nm
Non-schist: 683.95 - 684.11 nm
Schist: 684.43 - 684.72 nm

Note: it would be good to look for visual comparison and not to the numbers only. Since this measurement is very sensitive to calibration of the spectrometer, each user should create his own personal set of reference spectra.

ciao
albé

_________________
GemmoRaman-532 - GemmoFTIR - GemmoSphere - EXA


Top
 Profile  
Reply with quote  
 Post subject: Re: Raman/PL results: Characterizing emerald types
PostPosted: Tue Jan 22, 2013 3:11 pm 
Offline
Gold Member
User avatar

Joined: Mon Apr 16, 2007 12:05 am
Posts: 1499
Alberto, thanks for the numbers!

Alberto wrote:
it would be good to look for visual comparison and not to the numbers only. Since this measurement is very sensitive to calibration of the spectrometer, each user should create his own personal set of reference spectra.


Indeed, that is the plan. This would be a very nice research project for a student, as I have all the parts (laser, spectrometer, and low-pass filter) lying around. If only I can beg, borrow, steal enough different types of emeralds to build up the database.

And also, perhaps the student could take on Bill's challenge. Bill, where to purchase the filter set you speak of?


Top
 Profile  
Reply with quote  
 Post subject: Re: Raman/PL results: Characterizing emerald types
PostPosted: Wed Jan 23, 2013 1:33 am 
Offline
Gold Member

Joined: Mon May 14, 2007 11:00 am
Posts: 1133
Location: Monterey, CA
Quote:
Bill, where to purchase the filter set you speak of?

Send me your address.


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 4 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Gemology Style ported to phpBB3 by Christian Bullock